Legrand FP Series Activation Covers - Manual (Page 5)

5
1. Insert lower lip of Grommet into the
communication opening of the Cell.
Push the top of the Grommet inward
until it snaps into the Cell opening.
2. Install Barrier Base to N-R-G Deck
as shown using #10-32 Screws.
Follow directions below to
complete installation.
3. Install Cell Closure Plate to N-R-G
Deck as shown using #10-32 Screws.
FURNITURE FEED BARRIER KIT – Cat. No. NRGKIT
For use with UL Listed KAM Industries LTD, dba Cordeck Cellular Metal Raceway Fittings, catalog number
NB or N-R-G Bloc
® IV Series Presets
Communication Bend
Radius Grommet
N-R-G Bloc
Interior
Mount Barrier
Ear at bottom
#10-32 x 5/16" Self
Tap (Phillips Drive)
Cell Closure
Plate
1. Select suitable Upper Partition height for concrete
pour depth and position over Lower Partition. Attach
Trim Ring. Mount Upper Partition to Trim Ring with
#8-32 x 1/4 FHMS. Fasten Upper and Lower Partitions
with #8-32 x 3/8 PHMS.
2. Place Gasket on Flange and remove necessary
Screw Plugs for intended Conduit Fitting.
FURNITURE FEED ACTIVATIONS – FPFF SERIES
#8-32 x 1/4 FHMS
#8-32 x 1/4 PHMS
Trim Ring
1 1/4" x 2" Trade Size
NPT Reducer
1 1/4" Trade Size
NPT Screw Plug
1" Trade Size
NPT Screw Plug
Trim Ring
Gasket
Communication Plate
with 2" Trade Size NPT
opening (not listed for
power applications) Upper Partition
Bracket
Lower Partition
Bracket
#8-32 x 7/8"
FHMS (6X)
Power Plate with
1" Trade Size
NPT Opening
COVER ACTIVATION BARRIER COMMUNICATION
ASSEMBLY ASSEMBLY ASSEMBLY BRACKET
FPBTC
FPCTC (1) WPACR — (2) DTB-2
FPBT
FPCT
FPFFTC — (1) PKKIT (1) DTB-2FP
FPFFT
These fittings are for indoor installation on carpet or tile
covered concrete floors that contain a cellular raceway
system that has a minimum of 2-1/2" [64 mm] of concrete
topping over the top of the deck. A typical UL Filer
Classified floor activation will consist of the following
components:
PK Series Preset Inserts
“( )” Maximum Quantity of Units Allowed Inside of Preset Insert
COVER ACTIVATION BARRIER COMMUNICATION
ASSEMBLY ASSEMBLY ASSEMBLY BRACKET
(1) NPACR — (2) DTB-N3
(2) DTB-N3 or
(1) NRGACT8 or
(1) NPACR-SGL — (1) NRGRT8 or
(1) NRGACT12 or
(1) NRGRT12
FPBTC (1) NRGACT8 or
FPCTC (1) NPACR-DD — (1) NRGRT8 or
(1) NRGACT12 or
(1) NRGRT12
FPBT (1) NPACR-VDD — (1) NRGACT8 or
FPCT (1) NRGRT8 or
(1) NRGACT12 or
(1) NRGRT12
(2) NPACR-VDD — —
FPFFTC (1) NRGACT8 or
FPFFT (1) NRGRT8 or
— (1) NRGKIT (1) NRGACT12 or
(1) NRGRT12
N-R-G-Bloc ® Series Preset Inserts
“( )” Maximum Quantity of Units Allowed Inside of Preset Insert
FLOORPORT BRACKET COMPATIBILITY