Legrand DS4000 End Fittings - Manual (Page 3)

Step 1. Insert DS4010B Blank End Fitting onto end
of DS4000B Raceway Base and tighten
screws to secure. Do not over tighten.
Step 2. Snap DS4000C Cover sections onto
DS4000B Raceway Base and align with
DS4010B Blank End Fitting.
Step 3. Snap Trim Piece from DS4010B down
onto End Fitting from top covering
DS4000C Raceway Cover sections
and snapping into slots on End Fitting.
Step 4. Installation complete.
DS4010B INSTALLATION