Legrand WAPENCL Wireless Access Point Ceiling Enclosures - Manual (Page 2)

7.
8.
WIREMOLD
W IREM
OLD
5. 6. Determine orientation of antenna exit location and remove
desired knockout from cover. Install rubber grommet around
knockout opening.
Secure Wireless Access Point to cover using provided
hook and loop straps routed through the desired attach-
ment holes. Attach wires to Wireless Access Point. Attach safety
chain from cover to Wireless Access Point Box. Close
and lock cover.
Remove two adjacent tiles from ceiling. Install ceiling
tile that contains Wireless Access Point Box into ceiling
grid. Adjust Grid Lock Bars to attach to ceiling grid
and tighten screws to secure in place. Install wire into
Wireless Access Point Box by routing cables through
the fire stop foam. Reinstall all ceiling tiles.
NOTE: Evenly space wires in fire stop
foam. Do not bundle wires.
Knockouts
Hook and
Loop Straps
Grommet
Eyelet for
Suspension Cable
Cover Safety
Chain