Legrand AU7002 User Manual
Page 4
860.233.6251
1.877.BY.LEGRAND
www.legrand.ca
© Copyright 2014 Legrand All Rights Reserved.
2e
Ignore the pictures again, and press/release the “Bind” button on the
front of the AU7002 to bind it to the lyriQ system. Once the bind is
complete, the scree
n on the far right is shown. Press the “Next”
selection, as the binding operation is complete. The AU7002 LED will
change to white.
3a
Next you will be asked to name the zone, enter a name then press the
“Next” selection. On the next screen press the “Done” button (You will
not be adding another Zone when using the AU7002).
3b
Next you will need
to select your
location. After
selecting your
location pres “Next”
to advance to the
registration screen.
You can choose
“Later” or enter your
information then
press “Register”.
Next you will be
taken to the “Setup
Complete” page.
Press “Finish” then
you will be taken to
the control app.
3
Doc. #1507207 05/14 Rev C
CONFIGURATION / ADDING A ZONE