Leprecon VX Series permanent rack - Manual (Page 3)

This guide contains the recommended procedures for efficient and safe installation of Leprecon
Permanent Rack systems. Available base model numbers are show below.
• LPR-24-12; LPR-24-24; LPR-24-36, LPR-24-48
• LPR-37-12; LPR-37-24; LPR-37-36; LPR-37-48; LPR-37-60; LPR-37-72
• LPR-40-12; LPR-40-24; LPR-40-36; LPR-40-48; LPR-40-60; LPR-40-72; LPR-40-84
• LPR-44-12; LPR-44-24; LPR-44-36; LPR-44-48; LPR-44-60; LPR-44-72; LPR-44-84;
LPR-44-96
In the example above, the base system consists of a 24RU enclosure with four 12 channel, 20A
per channel Leprecon dimmers.
Dimming systems may be fitted with 10 amp or 20 amp model dimmers, or a combination of
both. Wiring requirements are stated for 20 amp systems, if 10 amp dimmers are used, the
power requirements obviously half of the stated requirement.
Warning - This information is provided for the use of qualified personnel only.
L P R 24 48
Leprecon
Dimming
System
Enclosure size in Rack Units
#Channels
2K
1K = 10A CH
2K = 20A CH