Installation and operating instructions, Model ssb-2 support (optional) bridge, Fig. 5 – Louroe Electronics ASK-4 501 TLI-CF User Manual
Page 6
Advertising
TLI Speaker/Microphone
Locator
Tabs (8)
Ceiling Tile
SSB-2 Suport
Bridge
ERD-8 Backbox
Snap-In tie off straps (2)
Horseshoe Tab (4)
backbox
bridge
MODEL SSB-2 SUPPORT
(OPTIONAL)
BRIDGE
If Model SSB-2 Support
is being used with Model TLI Speaker/Microphone ceiling Installation,
refer to drawing below for positioning SSB-2 Support Bridge.
SSB-2 is optional and used to prevent tile sag caused by the weight of the installation on suspended
ceiling.
Bridge
INSTALLATION AND OPERATING INSTRUCTIONS
Page 6 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
Fig. 5
Ask4_501-TLI-CF_inst_2/15
Advertising