Installation and operating instructions, Fig. 2, Description – Louroe Electronics ASK-4 601 User Manual

Page 2: Front panel layout of apr-1

Advertising
background image

[1] Power-Volume

Turns “ON” power to the unit and controls the audio volume

through the Speaker[9].

[2]

Power Indicator

Lights (green) when the power is present to the unit.

[3]

Mute Indicator

Lights (orange) when Mute Switch[6] is pushed in. Audio is muted.

[4] Playback Indicator

Lights (yellow) when Push for Playback[7] is pushed in to “ON” position.

[5] Overload Indicator Flashes (red) when there is a short in the power supply.

[6] Mute Switch

Used to mute the audio on both live and playback mode.

[7] Push for playback

Used for DVR/VCR playback. May also be used to listen to audio from an

external source. Press switch to listen to playback. Switch must be “OUT”
or “OFF” when monitoring and recording, otherwise live audio is muted.

[8] Headphone Jack

Used for private listening. Any 3.5mm stereo headphone with 8Ω

to

600Ω

impedance can be used.

[9] Speaker (3”) Provides live audio. Muted when a headphone is connected to

Headphone Jack [8].

DESCRIPTION

THE APR-1 IS SHOWN BELOW. ALL CONTROLS ARE LOCATED AT THE FRONT PANEL. ALL CONNECTIONS ARE
MADE AT THE REAR PANEL.

INSTALLATION AND OPERATING INSTRUCTIONS

FRONT PANEL LAYOUT OF APR-1

Page 2 of 8

LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406

TEL (818) 994-6498

FAX

994-6458

website: www.louroe.com e-mail: [email protected]

(818)

®

APR-1

MUTE

PUSH FOR
PLAYBACK

PWR

MUTE

PLAYBACK

OVERLOAD

SINGLE

ZONE

AUDI

O BAS

E STATI

ON

OFF

MAX

POWER-VOLUME

[3]

[4]

[5]

[1]

[2]

[6]

[7]

[8]

[9]

TM

Fig. 2

ASK4_601_inst 2/15

Advertising