Louroe Electronics TLM-W - Manual (Page 4)

INSTALLATION OF TLM-W SPEAKER/MICROPHONE
Model TLM-W is designed for mounting to a wall or flat surface. Included is a plastic back box for surface mounting to a
wall. If flush mounting is needed, a 3 gang electrical box (not supplied) maybe used.
1. Drill an opening at top, bottom, side or back for passing wiring or connecting conduit. Four small
screws are supplied for attaching back box to a wall.
Four screws are supplied for attaching the TLM faceplate to the back box. The plastic hole plugs must
be place on the screw holes of the faceplate to cover the screws.
INSTALLATION AND OPERATING INSTRUCTIONS
Page 4 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
tlm_w_inst_3/15
SPECIFICATIONS (Speaker/Mic - Model TLM-W)
Output of microphone (Mic)
Frequency Response (Mic)
Current Drain (mic)
Speaker
Line Level (0 dB, 600 W @ 1KW )
40 Hz to 15 kHz
10 mA
2 1/2”, 7W w/ 70V transformer
Faceplate
Backbox
Weight
Shipping Weight
6.8”L x 5.12”W x 0.5”D
6.92”L x 5.12”W x 1.62”D
13 oz
2 lbs