LSC Lighting EKO Installation - Manual (Page 2)

EKO Installations
Our Ref:
p:\eko\consultant specs\eko installation photo concepts v1.1.doc
Page 2 of 8
TCN 9 Sydney
As Installed Installation Frames
24 x EKO 524/R
24 x 20A channels with RCD on the input to each group of 12 channels
This EKO dimmer installation shows the retrofit to TCN 9s existing dimmer room, re-using
existing cabling systems.
o Existing cabling was carefully removed and left in place whilst the analogue dimmers
were removed.
o A unistrut framework was utilised to mount the EKO installation frame, to which the
existing cabling was re-terminated and tested.
o The wall frame was then sheeted out with plasterboard, set, skimmed and painted.
o The electronics cabinets were hung, mains inputs and data cabling terminated and the
dimmers configured and commissioned using the front panel touch screens menus.