Lumens Technology PS750 - Manual (Page 32)

English - 31
8.21.3.2 When the procedure is started, a setting window will pop up.
8.21.3.3 Press [CONNECT] to set up the connection. [Com Port]
lamp flashing green indicates a successful connection.
8.21.3.4 Press [Select Projector] to select the projector type and
display information.
8.21.3.5 Press [Program] to switch PS750 settings.
[Note] If any setting is modified, press [Save as] to set up a “*.txt” file
for setting storage.
8.21.3.6 When the setting is completed, press [Exit] to exit.
8.21.4 Connecting to a projector
8.21.4.1 Remove the RS-232 cable from the computer.
8.21.4.2 Connect the RS-232 cable to the RS-232 port on the
projector.
8.21.5 Control of projector
8.21.5.1 Press [Projector ON] on the control panel to turn on the
projector.
8.21.5.2 Press [Projector OFF] on the control panel to turn off the
projector.
PS750
PS750
RS232 Adapter



RS232 Adapter