Lumens Technology Ladibug iOS - Manual (Page 14)

13
6. Function Descriptions
6.1. I would like to optimize the image
 Press
.
6.2. I would like to freeze the live image
 Click
to freeze the live image of Ladibug™.
 Click
once again to lift the freeze.
6.3. I would like to turn on/off the lamp
 Press the to turn on/off the camera lamp.
6.4. I would like to adjust the brightness
 Click
to open the brightness scroll.
 Move rightward to increase brightness, or leftward to decrease brightness.
6.5. I would like to capture images
 Click
to capture images.
<Note> When the images are captured, please view the images on the image
browser page
6.6. I would like to capture images continuously
 Click to open burst mode setting. Click [OK] after setting.
<Note> Refer to 5.3 Time Lapse for more information about Time Lapse setting
<Note> When the images are captured, please view the images on the image
browser page
6.7. I would like to annotate the displayed image.
<Note> To annotate the stored images, please open the images on the image
browser page