Appendix, Specifications – Lynx Studio L22 User Manual

Page 26

Advertising
background image

Page 26

Appendix

Appendix

Specifications

Analog I/O

Number

Two inputs /Two outputs

Type

Electronically balanced or unbalanced, XLR connectors on
L2Audio Cable

Level

+4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV
max., software selectable in channel pairs

Bandwidth

< 10Hz – 92 kHz @ 200 kHz sample rate
< 10Hz – 46 kHz @ 96 kHz sample rate
< 10Hz – 23 kHz @ 48 kHz sample rate
(analog input to analog output)

Input Impedance

Balanced mode: 24 k

, Unbalanced mode: 12 k

Output Impedance

Balanced mode: 100

, Unbalanced mode: 50

Output Drive Capability

600

impedance, 0.16 µF capacitance

A/D and D/A Type

24-bit, multi-level, delta-sigma

Sample Rates

8 kHz to 200 kHz, including all standard rates with variable
adjustment

Bit Depth

8, 16, 24 or 32 bit file types

On-board Buffer Size

16 Kbytes per input and output stream (mono or stereo)

Analog In Performance

(measured in 24-bit mode with card installed in computer)

Frequency Response

20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate

Dynamic Range

117 dB, A-wtd.

Signal-to-Noise

116 dB, A-wtd.

Channel Crosstalk

<-120 dB, 1 kHz signal @ -1dBFS

THD+N

-108 dB (0.0004%) @ -1 dBFS
-104 dB (0.0006%) @ - 8 dBFS
1 kHz signal, 22Hz – 22kHz BW

Analog Out Performance

(measured in 24-bit mode with card installed in computer)

Frequency Response

20 - 20 kHz, ± 0.05 dB at 44.1 kHz sample rate

Dynamic Range

117 dB, A-wtd.

Signal-to-Noise

117 dB, A-wtd.

Channel Crosstalk

<-120 dB, 1 kHz signal @ -1dBFS

THD+N

-97 dB (0.0014%) @ -1 dBFS
-104 dB (0.0006%) @ -8 dBFS
1kHz signal, 22Hz - 22kHz BW

Digital I/O

Number / Type

One input and one output
AES/EBU or S/P DIF format, transformer coupled, XLR
connectors on L2Sync Cable

Sample Rates

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

Sample Rate Conversion Supports conversion ratios up to 3:1 on digital input, 128 dB

dynamic range

Bit Depth

8, 16, 24 or 32 bit file types

Control / Status

Complete subcode and channel status support

On-board Buffer Size

16 Kbytes per input and output stream (mono or stereo)

Advertising