Lynx Studio LT-TB Thunderbolt - Manual (Page 27)

27

Play
This button toggles whether controls for the Play Sources are visible from the Main window
or not. The Play section, when visible, appears as the middle pane of faders in the Lynx
Mixer.
Now let’s look at the Mixer Main Window in greater detail
7.3.2 Adapter Section
The Adapter Section is where the clock settings for the Aurora-
TB are established and monitored.

Current Source
This displays the clock source that is active. This may differ from
the selection in the “Preferred Clock Source” section, if an
invalid or offline clock source had been chosen there.

Measured Rate
Whether the Aurora is operating off of its Internal Clock, or some
External Clock Source, this button displays the sample rate that
the onboard frequency counter is measuring.



