DeLonghi DD1000TC Series - Manual (Page 7)

-7-
UNDERSTANDING THE CONTROL PANEL:
1. CLOCK / TIMER DIGITAL DISPLAY: Displays the clock and timer settings. See
“Setting the Clock” section of this manual for programming the time.
2. PROG BUTTON: This button allows you to program the coffee maker up to 24
hours before the desired brewing time. See the section on “Setting the Timer”
for details on activating the TIMER function.
3. “H” AND “M” BUTTONS: These buttons advance the hour and minute display
for the clock and timer. See the section on “Setting the Clock”.
4. TIMER LIGHT: When illuminated, indicates that the TIMER function is being used.
5. ON-OFF BUTTON: Activates the ON / OFF (power).
6. ON / OFF LIGHT: When the light is illuminated it indicates that the unit has begun
the brewing cycle.
7. SET BUTTON: Activates the TIMER function.
KNOW YOUR COFFEE MAKER (continued)
1. To preset your coffee maker to brew at a later time first verify that the clock is
set to the correct time. (See “Setting the Clock” section of this manual for
details).
The number on the digital display will flash until the time is set. To set the correct
time of day, first press the “H” button until the desired hour is reached. Then, press
the “M” button until the desired minutes are reached. Use the AM / PM indicator on
the left side of the digital display when setting the time. NOTE: Unplugging the unit
will reset the clock to 12:00.
SETTING THE CLOCK
SETTING THE TIMER (AUTOMATIC BREW MODE)
SET BUTTON PROGRAM
BUTTON
HOUR
BUTTON
MINUTE
BUTTON
ON/OFF
BUTTON
- Left
ON / OFF
BUTTON
- Right
ON/OFF LIGHT
- Right
ON/OFF LIGHT
- Left
TIMER LIGHT
- Left
TIMER LIGHT
- Right