Marantz NR1506 - Manual (Page 195)

o No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 25
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
27
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 27
0
Check that a proper input source is selected. 49
0
Adjust the volume. 50
0
Cancel the mute mode. 50
0
Check the digital audio input connector setting. 151
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
－
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and PRE OUT connector.
－
No sound comes out when
using the DVI-D
connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
－
Contents Connections Playback Settings Tips Appendix
195
Front panel Display Rear panel Remote Index