Marantz PM5003 - Manual (Page 8)

5
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTION
REMOTE CONTROLLER
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
ENGLISH
NAMES AND FUNCTIONS
REMOTE CONTROLLER
Using this remote controller, you can control the
PM5003 and Marantz CD players, DVD players,
tuners, tape decks etc. that have a remote control
receptor. The operations possible by remote
controller may differ with each component; therefore
see the instruction manual that came with the
component.
The remote controller buttons are laid out as shown
below.
z POWER ON/STANDBY buttons
a. MAIN POWER ON button
Turns the PM5003 power on when it is in the
standby mode.
b. MAIN POWER STANDBY button
Sets the PM5003 power to the standby
mode when it is set to the power-on mode.
c. SOURCE POWER button
Switching the mode of a CD player, tuner,
CD-R or other Marantz component equipped
with a power standby function between
power-on and standby is enabled by pressing
this button after the FUNCTION SELECT
button corresponding to the component has
been pressed.
When this button is pressed after pressing
the TUNER button, the tuner’s power is
turned on; when it is pressed again, the
tuner is set to the standby mode.
When this button is pressed after pressing
the AMP button, the PM5003 is switched
from the power-on mode to the standby
mode or vice versa.
* The remote controller cannot be used to
turn the primary power of the amplifier ON
and OFF.
x Input selector buttons
• Input source Buttons
These buttons are for directly selecting the
input source.
Caution
Some input jacks of this unit and the
corresponding input selector buttons on the
remote controller differ, as shown below.
The unit
Buttons on the
remote controller
AUX/DVD AUX, DVD
RECORDER2 TAPE, MD
For the input sources shown in the table above,
although the same jacks are used for two
types of sources on the unit, separate buttons
are provided on the remote controller.
When using the remote controller for operation
of a Marantz component connected to the
unit, select the input source first, then perform
operations.
• INPUT 5 Button
This button is for forward-feeding the input
source indications to select a desired
source.
The input source indication, which is
displayed on the function indicator on the
main frame, is fed to the right.
• INPUT ∞ Button
This button is for backward-feeding the
input source indications to select a desired
source.
The input source indication, which is
displayed on the function indicator on the
main frame, is fed to the left.
c
x
v
b
z
b
c VOLUME adjustment buttons
• MUTE Button
This button activates the mute function.
Pressing this button again releases the
MUTE function.
The MUTE function can also be released by
pressing either the VOLUME + or – buttons.
• VOLUME + Button
This button increases the volume level.
• VOLUME – Button
This button decreases the volume level.
v SOURCE DIRECT button
This button turns SOURCE DIRECT mode ON
and OFF.
b Component operating buttons
These buttons are for performing basic
operations of a Marantz CD player, DVD player,
etc. The function of each button changes to
match the component selected as the input
source using the input selector buttons.