Playing cds, V p. 29), This turns the analog mode on/off. (v p. 29) – Marantz PM7005 User Manual

Page 29: This turns source direct mode on/off. (v p. 29)

Advertising
background image

Playing CDs

This section uses playback from a CD as an example.

1

Press X on this unit to turn the power on.

2

Press SPEAKER on this unit to turn on the speaker

output.

The SPEAKERS indicator lights.

3

Press the input source select button (CD) to switch the

input source to “CD”.

The “CD” input indicator lights.

4

Playback the CD.

5

Press VOLUME df to adjust the volume.

o

Playback in source direct mode

The signal does not pass through the tone adjustment circuitry (BASS,

TREBLE and BALANCE), resulting in playback of a higher sound

quality.

1

Press SOURCE DIRECT to turn on source direct mode.

The SOURCE DIRECT indicator lights.

o

Playback in ANALOG MODE

If ANALOG MODE is turned on when playing back an analog input

source (Phono, CD, NETWORK, TUNER, RECORDER), power to the

digital input circuit is turned off. This prevents the analog signal circuit

from being affected by noise generated by the digital control circuit,

resulting in high quality audio playback.

1

Press ANALOG MODE to turn analog mode on.

The ANALOG MODE indicator lights.

0 A digital input source (COAXIAL, OPTICAL, USB-DAC) cannot be selected when

ANALOG MODE is on. Also, if the input source switching button on the remote

control unit is pressed to switch to a digital input source, the ANALOG MODE

indicator on the unit flashes to indicate that you cannot switch to a digital input

source.

0 The input source automatically switches to CD if ANALOG MODE is turned on

during playback of a digital input source (COAXIAL, OPTICAL, USB-DAC).

0 Communication between this unit and the computer is disconnected if ANALOG

MODE is turned on when a computer is connected to the USB-DAC input

connector of this unit. If the unit cannot communicate with the computer after

turning ANALOG MODE off again, disconnect and reconnect the USB cable or

restart the audio player on the computer.

0 When the analog mode is switched, the mute circuit is activated for about 4

seconds.

Contents

Connections

Playback

Settings

Tips

Appendix

29

Front panel

Rear panel

Remote control

unit

Index

Advertising
This manual is related to the following products: