Marantz MCR603 - Manual (Page 33)

27
ENGLISH
Getting Started
Connections
Basic Operations
Advanced Operations Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
The wireless receiver connection
By connecting a wireless receiver RX101 (sold separately) to this unit,
you can receive and playback audio signals from other devices using
the Bluetooth Communication Function.
• Use a Bluetooth device that is A2DP compatible.
• You can also use wireless receiver RX101 as an external IR receiver.
• For instructions on the wireless receiver settings, refer to the
RX101’s operating instructions.
Wireless receiver
RX101
Remote control unit
Bluetooth device
(A2DP Compatibility)
When you connect RX101 to M-XPort on this unit, the function
switches to M-XPort.
Remote control connection
The unit can be controlled using the remote sensor of RX101 connected
to the unit. Be sure to set “IR=DISABLE” when controlling in this way.
NOTE
When making this remote control connection, be sure to set the IR
switch of RX101 that is connected to the unit, to ON.
Setting the remote control
1 Press [MENU] .
Turns on the Menu settings mode and the Menu appears on the
display. (vpage 26 “Menu map”)
2 Use ui to select “Other”-“IR Setting”-“Disable”,
then press [ENTER/MEMO] , <ENTER> or p .
To restore original settings, repeat steps 1 and 2, select “ENABLE”
and press
<ENTER> .
NOTE
The unit cannot be controlled using the remote controller while
“DISABLE” is set.
1.M-CR603N_ENG_0728.indd 27 1.M-CR603N_ENG_0728.indd 27 2010/07/29 20:39:26 2010/07/29 20:39:26