Marantz UD8004 User Manual
Page 30
Troubl
eshooting
Information
HDMI
Control
Function
Pl
ayback
Connections
Getting Started
Specifications
2
ENGLISH
Setting items
Setting contents
7.1ch Audio Out
NOTE
Select· “Large”· or· “Small”· not· according· to· the· physical· size· of· the·
speaker·but·according·to·the·low·frequency·reproduction·capabilities·
based·on·the·frequency·set·at·“Crossover·Freq.”.
On·the·GUI·menu,·if·the·“Audio·Setup”·–·“7.1ch·Audio·Out”–·“Multi·
Channel” – “Speaker Configuration” item setting is changed, other
settings·are·automatically·changed·as·well.
G
ExampleH
If·you·set·“Front”·to·“Small”,·“Subwoofer”·is·set·to·“Yes”·and·“Large”·
cannot·be·selected·for·“Center”,·“Surround”·and·“Surr.·Back”.
Audio· signal· (sampling· frequency,· number· of· channels)· from· the·
HDMI output terminal may be restricted by the specification of the
HDMI··audio·that·can·be·input·by·the·device·at·the·other·side.
G
ExampleH
If the HDMI audio specification of the device at the other side is the
5.1·channel,·even·when·UD8004·plays·back·by·the·7.1·channel,·the·
5.1· channel· audio· is· automatically· output.· In· that· case,· the· analog·
audio·output·becomes·the·5.1·channel·output·as·well.
•
•
•
n
·
Channel Level :·Set·the·volume·of·the·test·tone·to·be·the·same·when·
it·is·output·from·each·speaker.·
G
ModeH :·Select·a·test·tone·output·method.
Auto :·Automatically·switch·the·test·tone·output·speaker.
Manual :·Manually·switch·the·test·tone·output·speaker.
G
StartH :·Begin·outputting·the·test·tone.
Front L / Center / Front R / Surround R /
Surr. Back R / Surr. Back L / Surround L / Subwoofer
When·the·test·tone·output·stops,·press·
.·
G
SW +10dBH :·Increase·the·subwoofer·output·level·by·10·dB.
z
Off :·Do·not·change·the·subwoofer·output·level.
On :·Increase·the·subwoofer·output·level·by·+10·dB.
z
: “SW·+10dB”· cannot· be· set· for· “HDMI· Setup”· –· “Audio· Setup”· –·
“Multi·LPCM·BM·On”·–·“Channel·Level”·on·the·GUI·menu.
G
DefaultH :·Reset·all·channel·level·settings·to·factory·default.
No :·Do·not·Reset.
Yes :·Reset.
•
•
b
•
•
•
•
Audio Setup
Setting items
Setting contents
7.1ch Audio Out
n
·
Distance :·Set·the·distance·between·the·listening·position·and·each·
speaker.
G
FeetH or·GMetersH :·Set·the·unit·of·distance.
G
StepH :·Set·the·minimum·variable·width·of·the·distance.
1ft, 0.1ft, 0.1m, 0.01m
G
DefaultH :·Reset·all·distance·settings·to·factory·default.
Front L / Front R / Center / Subwoofer / Surround L / Surround R /
Surr. Back L / Surr. Back R :· Select· the· speaker· you· want· to· set,·
and· set· the· distance.· Set· the· value· that· is· closest· to· the· measured·
distance.
0~60ft or 0~18.00m
Default·settings·:
Front/Center/Subwoofer·:·12·feet·(3.6·meters)
Surround/Surr.·Back·:·10·feet·(3.0·meters)
Set·the·difference·in·the·distance·betweem·the·speakers·to·less·than·
20·feet·(6.0·meters).
NOTE
When·“BD·Audio·Mode”·is·set·to·“HD·Audio·Output”·(vpage·31),·the·
“Distance”·setting·is·disabled·during·DTS-HD·192kHz·audio·playback.
•
•
Subwoofer Mode
Set·the·type·of·low·frequency·
signal·to·be·output·from·the·
subwoofer.
LFE :·Add·the·low·frequency·signal·of·the·channel·for·which·the·speaker·
size·is·set·to·“small”·to·the·subwoofer·signal·and·output·it.
LFE+Main :·Add·the·low·frequency·signal·of·all·channels·to·the·subwoofer·
signal·and·output·it.
Remote control operation
buttons
:Displaying·the·menu
·Cancel·the·menu
:Moves·the·cursor·
·(Up/Down/Left/Right)
:Decision·the·setting
:Return·to·previous·menu
Setup