Using the dvd player, Disc organization, Title – Dynex DX-LTDVD22-09 User Manual

Page 24: Chapter, Track, Regional code, Understanding the disc status screen, Playing dvds, Controlling playback, Understanding the disc status screen playing dvds

Advertising
background image

24

Using the DVD player

Using the DVD player

Disc organization

Title
When two or more movies are recorded on a disc, the disc is divided into
two or more sections. Each section is called a “Title..”

Chapter
The titles can be subdivided into many sections. Each section is called a
“Chapter.”

Track
An audio CD can contain several items. These are assigned to the tracks.

Regional code

Your player has a regional code 1 printed on the back of the case. Your
player can play only DVDs labeled with the same regional code 1 or ALL.

Notes:
Most DVDs have a globe with one or more numbers in it clearly visible on

the cover. This number must match your player’s regional code or the
DVD cannot play.

If you try to play a DVD with a different regional code from your player, the

message “Check Regional Code” appears on the TV screen.

Understanding the disc status screen

To view the disc status screen:

1 Press DISPLAY. The disc status screen opens.

2 When you are finished viewing the disc status screen, press

DISPLAY again to return to normal viewing.

Playing DVDs

To play a DVD:

1 Press TV/DVD to change to DVD mode (each time you turn the TV

on, it starts in the TV mode). The DVD startup screen appears.

2 If you are using an amplifier, turn it on.

3 Place the disc in the disc slot with the label side facing forward.

Hold the disc by the edges, without touching either of its
surfaces.

On the screen,

changes to “Reading” and playback begins.

If the disc has a menu feature, the menu screen may appear. In
this case, press

,

,

,

or

and ENTER to navigate the menu.

4 Press STOP to end playback. The unit memorizes the stopped

point and

appears on the screen. Press PLAY to resume

playback (from the memorized point).

5 If you press STOP again, or unload the disc, the unit clears the

memorized stop point.

6 Press

(eject). Remove the disc and then press POWER. The

unit turns off.

Notes:
If your unit does not operate properly, it may be affected by static

electricity. Disconnect the AC power cord, then connect it again.

If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error,” or

“Parental Error” appears on the TV screen, depending on the type of
disc loaded. See “Playable discs”
on page 32.

Some discs may take about a minute to start playback.
If an 8 cm disc is loaded and picture playback or menu display does not

begin automatically, press PLAY to begin playback.

A “Prohibition” symbol

“X”

may appear at the upper right of the screen.

This symbol means either the feature you tried is not available on the
disc, or the player cannot access the feature at this time. This does not
indicate a problem with the player.

If you load a single-faced disc backwards, “Reading” appears on the

screen, then “Incorrect Disc” is displayed.

Some DVD playback operations may be intentionally preset by the

manufacturer. Since this player plays DVDs according to the disc
content recorded, some playback features may not be available. Refer
to the instructions supplied with the DVD.

Controlling playback

To control playback:

Fast Forward Playback—Press SEARCH

during normal

playback. Each time you press SEARCH

,

the speed increases

(DVD - Ч 2, Ч 4, Ч 8, Ч15) (CD - Ч 2, Ч 4, Ч 8, Ч 20). Press PLAY

to resume normal playback.

Fast Reverse Playback—Press SEARCH

during normal

playback. Each time you press SEARCH

,

the speed increases

(DVD - Ч 2, Ч 4, Ч 8, Ч15) (CD - Ч 2, Ч 4, Ч 8, Ч 20). Press PLAY

to resume normal playback.

Pause—Press PAUSE/STILL

during normal playback to

pause the program. Press PLAY

to resume normal playback.

Frame Advance—Press PAUSE/STILL

during normal

playback to pause the program. Each time you press
PAUSE/STILL

the program is advanced one frame. Press

PLAY

to resume normal playback.

Slow-motion Playback—Press SLOW

reverse or

SLOW

forward during normal playback or still playback. Each

press of either button decreases the speed of the program (Ч1/2,
Ч1/4, Ч1/6, Ч1/7). Press PLAY

to resume normal playback.

#

Information

1

Current disc operation

2

Elapsed time

3

Total time

4

Chapter number playing

5

Subtitle language selected

6

Audio type selected

7

Audio language selected

8

Angle selected

9

DVD title number

9

3

:

1

4

:

1

0

5

2

:

5

1

:

0

0

D

V

D

Title 1/3

Chapter 2/24

1/1 Eng Dolby Digital

1/2 Eng

1/1

1

2

3

4

5

6

7

8

9

Advertising