Maytag MED8100DC Dimension Guide - Manual

Electric Dryer
PRODUCT MODEL NUMBERS
Front view:
Side view:
Back view: Recommended Installation Spacing:
Installation spacing for recessed area or closet installation
The dimensions shown below are the recommended spacing for this dryer.
■ Additional spacing should be considered for ease of installation and servicing.
■ Additional clearances might be required for wall, door, floor moldings, and dryer venting.
■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered
doors with equivalent ventilation openings are acceptable. Companion appliance spacing should also be considered. W10676165A
04/2014
MED3100D, MED4100D, MED5100D, MED7100D, MED8100D
27"
(686 mm)
38 3 /
4
" Min.
(984 mm)
39" Max.
(990 mm)
6 1 /
2
"
(165 mm)
29 7 /
8
"*
(759 mm)
3 1 /
2
"*
(89 mm)
6 1 /
8
"*
(156 mm)
14 3 /
8
"
(365 mm)
3 /
4
"*
(18 mm)
NOTE: Most
installations
require a minimum
of 5" (127 mm)
clearance behind
dryer for exhaust
vent with elbow.
See “Venting
Requirements.”
* Approx. measurement.
Power supply
cord/cable
Water inlet
(Steam
models
Vent
18" min.
(457 mm)
1"
(25 mm)
5"
(127 mm)
24 in. 2 min.
(155 cm 2 )
48 in. 2 min.
(310 cm 2 )
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)