Maytag LAT3600AAE - Manual (Page 5)

Step 6
Step 5
4
Select Cycle
To select a cycle, push the control dial IN and turn it to
the right (clockwise) until the pointer is at the number
of minutes desired for the wash load.
Regular Cycle
For regular fabrics, select the cycle time and turn the
Wash/Spin Speed dial to Regular/Fast/Fast. For max-
imum cleaning set the dial at 16.
Permanent Press Cycle
This cycle provides up to 10 minutes of agitation.
Depending on the load, select either the
Regular/Fast/Fast or Perm. Press/Fast/Slow wash/
spin speed.
Gentle Cycle
The Gentle Cycle provides approximately 10 minutes
of agitation and soaking to help remove stains.
Pull Control Dial Out to Start
You may stop the washer at any time by simply push-
ing the control dial IN. Therefore it is possible to obtain
a non-agitated soak or to shorten, skip or repeat any
part of a cycle. The control dial must be pushed IN (off
position) when you change the setting.
See Laundering Tips for proper washing procedures,
stain removal, and special laundering situations.
Sturdy fabrics needing maxi-
mum water extraction.
Sturdy fabrics needing a
slower spin speed because of
wrinkling.
Delicate fabrics needing
slower spin speed because
of clothing construction.
Regular
Fast/Fast
Perm. Press
Fast/Slow
Gentle
Slow/Slow
WASH/SPIN SPEEDS LOAD TYPE
Select Wash/Spin Speed
Your washer has selectable wash and spin speed
combinations.
Step 4
Note: Do not attempt to turn the control dial coun-
terclockwise. Damage to the timer will result.
Soak Only
There will be a brief period of agitation followed by a
soak. Soaking should be no longer than 30 minutes. The
control dial must be advanced manually to a spin or a
wash setting.