Denon AVR-2310CI - Manual (Page 41)

3
Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Setting items Setting contents
Video Select
Switch video input source
while listening to audio
signal. Source : Play the picture and sound of the input source.
DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input
source to view. This can be set for individual input sources.
NOTE
It is not possible to select HDMI input signals.
When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
Input sources for which “Delete” is selected at “Source Delete” (vpage
33) cannot be selected.
Input sources for which “None” is selected at “Input Assign” (vpage
37) cannot be selected.
• This can also be set by pressing .
• To cancel, press to select “Source”.
•
•
•
•
Video Convert
The input video signal is
converted automatically in
function of the connected
TV (vpage 10 “Converting
Input Video Signals for
Output (Video Conversion
Function)”).
This can be set when the input source is DVD HDP TV SAT/CBL
VCR DVR V.AUX .
ON : The input video signal is converted.
OFF : The input video signal is not converted.
When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case set “Video Convert” to “OFF”.
When “Video Convert” is set to “OFF”, the video conversion function
does not work. In this case, connect the AVR-2310CI and TV with the
same type of cable. •
•
i/p Scaler
The input source’s resolution
is converted to the resolution
set at “Resolution”.
This can be set to the DVD HDP TV SAT/CBL VCR DVR V.AUX
input sources.
OFF : Do not use i/p scaler function.
Analog : Analog signals are converted to HDMI signals.
Analog and HDMI : Both analog signals and HDMI signals are converted
to the desired HDMI resolution.
Resolution
Set the output resolution.
Resolution A (Analog) : Analog
Video
Resolution H (HDMI) : HDMI
This can be set when the input source is set to DVD HDP TV
SAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anything
other than “OFF”.
AUTO : Detect monitor panel resolution and automatically set output
resolution.
480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Select the output
resolution.
Making the video settings (Video)
Default settings are underlined.
Making the input settings (Input Setup)
The items that can be set depend on the input source and the “Input Assign” setting.
: Moves the cursor (Up/Down/Left/Right) : Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Set
tings
Setting items Setting contents
Progressive Mode
Select optimum progressive
mode for video material.
This can be set when the input source is set to DVD HDP TV
SAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anything
other than “OFF”.
AUTO : The video material is automatically detected and the appropriate
mode is set.
Video1 : Select mode suitable for video playback.
Video2 : Select mode suitable for video and 30-frame film material
playback.
Aspect
Set the aspect ratio of the
video signal output from the
HDMI terminal.
This can be set when the input source is set to DVD HDP TV
SAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anything
other than “OFF”.
Normal : Output at 4:3 aspect ratio.
Full : Output at 16:9 aspect ratio.