Q-See QSC26404 QH32DVR4C - Manual (Page 35)

QH32DVR4C User’s Manual
35
Fig 5.4 user management
Step 2: Add new user name
In the “User Management” menu, move “Active Frame” to “Add” button and
press
【ENTER】, in the pop-up dialog box input the new user name (refer to Chapter
3.4), press
【ENTER】and return to “User Management” menu. A total of 15 users can
be added. See fig 5.5.
Fig 5.5 Input user name
Step 3: Setup the password for new user
After you add a new user, the password is blank. You can skip this step if you do
not want to setup a password.
In the user’s list box of “User Management” menu, use
【 】 【 】keys to select the
new user name, then use
【 】key to go to the password edit box. Press【EDIT】key
to enter into edit box, use numeric keys to input the new password.