Q-See QSC26404 QH32DVR4C - Manual (Page 7)

QH32DVR4C User’s Manual
7
Chapter 2: Installation
Warning: Before you install the DVR, please make sure the power to the DVR is
switched off.
2.1 Checking the DVR and Its Accessories
When you get the product, check that all the items are included in your product
package. The Package should include:
1-QSC26404 DVR 1-5 way power supply for cameras & DVR
2-QOCDC60 cameras 4-60 foot cables for cameras
2-QOCDC36 cameras 5-Female RCA to Male BNC connectors
1-Installation CD 1-320GB Hard Drive (installed in DVR)
1-Product Manual 1-Remote Control (with 2 AA Batteries)
1-USB Mouse 1-RJ45 Ethernet Cable
1-USB 2.0 Cable
2.2 Hard Drive (HDD) Installation
Installation Notice
Note: The QH32DVR4C Bundle comes with a 320GB Hard Drive already
installed so you will only need to follow these instructions if you want or need to
install a new hard drive in the DVR.
Installation Tools
One Phillips screw driver.
HDD Installation
1.
Remove the DVR box lid.
2.
Place the HDD on the mounting plate.
3.
Connect the ATA data cable correctly. The cable has three connectors for
DVR main board, master HDD and slave HDD.
4.
Plug in the HDD power connector.
5.
Replace and reattach the DVR box lid.
Note: After the HDD is installed, it must be formatted. Please refer to
Chapter 6.4 .