Maytag MMC5000BDB Dimension Guide - Manual

Dimensions
MMC5000B
These appliances have been designed in accordance with the requirements of various safety
agencies and comply with the maximum allowable wood cabinet temperatures of 194 degrees F.
If these appliances are installed with cabinets that have a lower working temperature than 194
degrees F, discoloration, delamination or melting may occur.
Important: Because of continuing product improvements, Jenn-Air reserves the right to change specifications without
notice. Dimensional specifications are provided for planning purposes only. For complete details see installation
instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
Inches Centimeters
A see chart below see chart below
B see chart below see chart below
C
z
48 121.9
D 16 1/16 40.8
E 13 5/16 33.8
F 23 1/4 59.1
G 18 5/16 46.5
Notes:
Y. When installing this Kit above a built-in oven, check built-in oven installation instructions
to determine cutout dimensions for the (lower) wall oven.
Z. For a new installation, the 48" height dimension to the bottom of the cutout
for the microwave oven is recommended. This places the microwave oven bottom at
approximately 50" from the floor.
1. Model MMC5000B can be used with trim kits for built-in installation. Do not build-in above gas wall
ovens due to placement of gas wall oven vent.
2. Trim kits to install MMC5000B include: For 27" wall oven, use MMA27B/W, installed dimensions are
17"H x 26 3/4"W. For 30" wall ovens, use MMA30B/W, installed dimensions are 17"H x 29 3/4"W.
3. For 27" trim, A = 25 1/2" (64.8 cm)
For 30" trim, A = 28 3/16" (72 cm)
Model A B
MMA27 25 1/2" 28 3/4" minimum
MMA30 28 3/16" 28 3/4" minimum
Trim Kit Dimensions