MBM Corporation TRIUMPH 5560 - Manual (Page 19)

- 19 -
T
• Operation •
Eject function
If EJECT R is pressed instead of START P ,
after inserting the measurement O , the
backgauge will advance forwards so that
paper can be removed. Finally the backgauge
moves to the last setting.
Multiple cut
• Enter the start dimension on the display O
• Advance to the measurement with the
START P
• Push the paper to the backgauge I
• Press multiple cut T
• Multiple cut sign appears top left together
with the value 00.00 S
• Enter multiple cut measurement (appears in
red letters)
• Press START the backgauge advances
by the multiple cut size
• This is repeated everytime a cut is
activated.
Exiting program-mode
• Press multiple cut T (yellow).
Multiple cut sign and value are deleted.