MBM Corporation TRIUMPH 5560 User Manual
Page 23
Advertising
- 23 -
•
Blade and cutting stick replacement
•
If the cutting quality decreases:
•
Check the cutting depth (see page 33).
•
Check the cutting stick (see page 27).
•
Replace or grind the blade (see page 23 - 33).
The blade cannot be ground if the blade
height is less than 8,2 cm / 3,23 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only
be performed by trained staff.
Advertising
This manual is related to the following products: