MBM Corporation TRIUMPH 5222 DIGICUT - Manual (Page 35)

-35 -
5222 DIGICUT
Maintenance work may only be performed by
trained staff.
Danger! Disconnect the mains before
starting any service work or before
removing the cover.
Grease the backgauge (A) control weekly with
a grease gun. Advance the backgauge as far
as possible to the front. (Use non-resinous oil
or grease).
Grease the remaining parts twice a year (see
picture).
Lower the blade by pressing both cutting
buttons. Keep one button pressed and
turn off the main switch (B).
Disconnect from the mains.
Remove the front upper housing (E) taking
care of the cable.
Remove lower panel and rear wooden panel
(C). Tools in tool set.
• Check oil (F). If oil is below minimum contact
your dealer.
• Remove any paper.
• Grease the machine.
• Check the 4 joining bolts and 2 pushing bars
for wear (D). If necessary inform your service
personnel.
• Mount the machine.
• Maintenance and cleaning •
= Greasing points on the machine.