MBM Corporation EBA 435 E - Manual (Page 23)

- 23 -
Eject function
If the z button is kept pressed the
backgauge I will advance to measurement
9 cm (standard setting of the machine).
Finally the backgauge moves to the last
setting.
If the z button is released while the
backgauge moves to the front, the backgauge
stops and moves to the last setting.
Cutting activation
Warning!
• Run backgauge to the front for turning the
paper stack.
• Do not interrupt the upward movement of the
blade by performing switching procedures.
• Release blade only when LED "S" has gone
out. ( Only EBA 435 EP).
• Close the front safety guard A.
• Blade must always be at the top and be
covered by the clamp. Do not touch the blade
- risk of injury! (see security information on
page 35).
•
Operation
•