Denon AVR-890 - Manual (Page 36)


Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Making detailed settings (Manual Setup)
Setting items Setting contents
Quick Select Name
Change the Quick Select
name. Rename Label : Change the display name of the selected “Quick Select”
setting.
1. Use
ui to select the name of the Quick Select setting you want
to change, then press .
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press .
• Up to 16 characters can be input.
• The input character type can be switched by pressing
while the
display name is being changed.
• The types of characters that can be input are as shown below.
G Upper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
G Lower case charactersH abcdefghijklmnopqrstuvwxyz
G SymbolsH ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
G NumbersH 0123456789 (Space)
4. Repeat steps 2 and 3 to change the display name.
Zone Rename
Rename the display names
of the different zones as
desired. 1. Use ui to select the zone name you want to change, then press
.
MAIN ZONE / ZONE2
2. Use o p to set the cursor to the character you want to change.
3. Use ui to change the character, then press .
• Up to 10 characters can be input.
• The input character type can be switched by pressing
while the
display name is being changed.
• The types of characters that can be input are as shown below.
G Upper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
G Lower case charactersH abcdefghijklmnopqrstuvwxyz
G SymbolsH ! “ # $ % & ‘ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜
G NumbersH 0123456789 (Space)
4. Repeat steps 2 and 3 to change the display name.
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Setting items Setting contents
Remote ID
Set when you operate
another DENON AV amplifier
with the remote control unit
of the AVR-890. Match the
remote control unit you are
using with the remote ID of
the AVR-890. 1 / 2 / 3 / 4
When using the AVR-890 with only the included remote control unit
(RC-1117), use Remote ID “1” (default).
When using a separately sold remote control unit (RC-7000CI, etc.),
this function can be used. Match the ID setting of the remote control
unit and the receiver.
Dimmer
Adjust display brightness of
the receiver. Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
OFF : Turns the display off.
Switching is also possible by pressing on the main unit.
•
•
•
•
Setup Lock
Protect
settings from
inadvertent change.
ON : Turn protection on.
OFF : Turn protection off.
When “Setup Lock” is set to “ON”, the settings listed below can
no longer be changed. Also, “SETUP LOCKED!” is displayed if you
attempt to operate related settings.
・RESTORER
・Dynamic Volume
・MultEQ ・Channel Level
・Dynamic EQ ・Audio Delay
•
•
Set
tings