Denon AVR-890 - Manual (Page 69)


Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Specifications
ENGLISH
Multi-Zone
Set
tings
Symptom Cause Countermeasure Page
Dolby TrueHD,
DTS-HD, Dolby
Digital Plus audio
is not output. • HDMI is not connected.
• Blu-ray Disc player’s audio output
setting is not set to bitstream.
• Blu-ray Disc player is not
compatible with DTS sound
playback.
• Connect the HDMI.
• Set the Blu-ray Disc player. For
details, refer to the Blu-ray Disc
player’s operating instructions.
• Use a DTS-compatible player.
12
–
–
Symptom Cause Countermeasure Page
No sound is
produced from
center speaker. • You are playing a monaural source
(TV, etc.) in the “STANDARD”
(Dolby/DTS Surround) mode.
• The mode is set to something
other than “STANDARD” (Dolby/
DTS Surround).
44
No sound
is produced
from surround
speakers. • The surround mode is set to
“STEREO”, “DIRECT” or “PURE
DIRECT”.
• Set to a surround playback
mode.
45, 46
No sound is
produced from
surround back
speaker. • The surround back speaker’s
power amplifier is assigned to a
different channel.
• “S.Back” setting is set to
“None”.
• The “Audio/Video Adjust”
– “Audio Adjust” – “Surround
Back” settings are “OFF”.
• Surround mode not set to a mode
for 6.1- or 7.1-channel playback.
• Check the setting and change it
as necessary.
• Set to something other than
“None”.
• Please set “Audio/Video Adjust”
– “Audio Adjust” – “Surround
Back” to settings other than
“OFF”.
• Select a surround playback
mode.
27
28
47
44
No sound is
produced from
subwoofer. • Subwoofer’s power not turned
on.
• The “Subwoofer” setting at
“Speaker Config.” is set to “No”.
• The subwoofer is not properly
connected.
• The subwoofer’s volume is
turned off.
• Turn on the subwoofer’s power.
• Set to “Yes”.
• Check the connections.
• Adjust the subwoofer’s volume
to an appropriate level.
–
27
11
53
DTS sound is not
output. • Blu-ray Disc player / DVD player’s
audio output setting is not set to
bitstream.
• Blu-ray Disc player / DVD player is
not compatible with DTS sound
playback.
• The AVR-890’s “Decode Mode”
setting is set to “PCM”.
• Set the Blu-ray Disc player / DVD
player. For details, refer to the
Blu-ray Disc player / DVD player’s
operating instructions.
• Use a DTS-compatible player.
• Set to the “Auto” or “DTS”
mode.
–
–
37
HDMI audio
signals are not
output from
speakers. • The “Manual Setup” – “HDMI
Setup” – “HDMI Audio Out”
setting is set to “TV”.
• Set to “Amp”. 30
No sound is
output from
the monitor
connected
with HDMI
connections. • The “Manual Setup” – “HDMI
Setup” – “HDMI Audio Out”
setting is set to “Amp”.
• Set to “TV”. 30
G AudioH
Tr
oubleshooting
Symptom Cause Countermeasure Page
No picture
appears. • The connections between the
AVR-890 and monitor are faulty.
• The monitor’s input setting is
wrong.
• PURE DIRECT mode is set.
• The player is connected using
the component input connectors,
the monitor is connected
using the video (yellow) output
connectors.
• Check the connections.
• Set properly.
• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and
progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.
12 ~ 16
–
46
–
Picture cannot be
recorded. • Input source does not match
recorder’s video connection
connector (video).
• The video conversion function
does not work for the REC
OUT connectors. Match the
input source and recorder
connections.
15
DVDs cannot be
copied on a DVR.
–
• This is not a malfunction. Most
movie software includes copy
prevention signals and cannot be
copied.
–
The menu screen
and status
indicators are not
displayed.
• “OFF” is displayed for the
status.
• The main volume display is
“OFF”.
• The display during tuner operation
is “OFF”.
• The display during iPod operation
is “OFF”.
• When viewing HDMI or
component video signals via the
AVR-890, the GUI menu appears
when the
MENU button on the
main unit or the MENU button on
the remote control unit.
• Set “Manual Setup” – “Option
Setup” – “GUI” – “Text” to
“ON”.
• Set “Manual Setup” – “Option
Setup” – “GUI” – “Master
Volume” to “Top” or “Bottom”.
• Set when “Manual Setup” –
“GUI ” – “Tuner Information” is
not “OFF”.
• Set when “Manual Setup”
– “GUI” – “ iPod Information” is
not “OFF”.
9
32
32
32
32
G VideoH