Measurement Computing Micro488/p - Manual (Page 37)

Command Descriptions 09-27-02 3-19
X XOFF/XON
The system command XOFF/XON enables or disables XON/XOFF handshaking.
SYNTAX X;n
n = 0, disable XON/XOFF handshaking.
n = 1, enable XON/XOFF handshaking.
RESPONSE None
BUS STATES None
EXAMPLE PRINT #1, "X;1" Enable XON/XOFF
handshaking.
<CTRL>S XOFF
The system command XOFF temporarily inhibits serial transmission from the Micro488/p.
SYNTAX <CTRL> S or CHR$(19)
RESPONSE None
BUS STATES None
EXAMPLE PRINT #1, CHR$(19)