Measurement Computing Digital488 - Manual (Page 49)

Section 3 Command Descriptions
3.19
Inhibit Qn
The Inhibit control command allows software control of the Inhibit line,
independent of any other I/O activities. The 'set' and 'clear' levels of the Inhibit line are
determined by the Invert command.
Q0 Clear the Inhibit line (return to unasserted state)
Q1 Set the Inhibit line (place in the asserted state)
Example:
CLEAR 718 reset the Digital488
OUTPUT 718;"Q1X" set the Inhibit line