Measurement Computing GPIB-488 - Manual (Page 29)

Chapter 3 GPIB 488.1 Library Reference
Programming Reference Manual 3-16 GPIB-488
Example
This example opens an available device, associates it with GPIB interface board 1, and assigns
it the following device configuration parameters.
• primary address = 3
• secondary address = 19 (115 decimal, 73 hex)
• timeout = 10 sec
• Assert EOI
• EOS Disabled
• The new device handle is returned.
C int device;
device = ibdev(1, 3, 0x73, 13, 1, 0);