Measurement Computing eZ-PostView rev.2.0 - Manual (Page 121)

eZ-Analyst 969895 Interactive Plot Display 5-3
Another method of choosing a cursor, as opposed to using the button, is to right-click on the
plot region and select “cursor” from the resulting pop-up window. This is indicated in the
following figure.
You can “Right-Click” in the Plot Region and then select a desired cursor function.
Illustrated examples of different cursor types and related “X” and “Y” annotations follow.
Cursor Off – Turns all cursors off.
Single Cursor – Provides a single cursor that applies to one channel. To change the channel
that the cursor applies to: (1) Left-click once on the desired channel’s channel box (or plot
line), (2) Left-click a second time to assign the cursor to that channel. (See figure).
Assigning a Cursor to a Different Channel
Single Cursor
on Channel 1
Left-click once
to select the channel
that you want to
assign the cursor to.
Single Cursor
on Channel 2
Left-click a second
time to actually set the
cursor to the desired
channel.