Silent mode, Panic mode – Directed Audio 2 Way Security and Conveniece System VSS-204TW User Manual

Page 14

Advertising
background image

(This is the factory setting.)

S

ILENT MODE

To temporarily turn off the arm or disarm chirps, use Silent Mode™. Simply press

for less than

one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that

one operation only. If you want the arm/disarm chirps turned off permanently, your dealer can

do this for you.

NOTE: The Warn Away

®

response to lighter impacts is bypassed if the

system is armed using Silent Mode. This ensures that no chirps will be
emitted by the siren in an area you want chirp-free. The system is still

fully capable of triggering. Only the Warn Away

®

response is bypassed.

The LCD remote responds with the normal arm/disarm notifications in silent mode. (If the remote

has beeps programmed On, the remote will beep.)

P

ANIC MODE

LCD remote

If you are threatened in or near your vehicle, you can attract attention by triggering the system

with your LCD remote. Just press

for 2 seconds or press

or

buttons for five seconds,

and you will enter Panic Mode. The siren will sound and the parking lights will flash for the

programmed siren duration. To stop Panic Mode at any time, repeat the command but hold on

the button for only one second.

The LCD remote responds with one beep and display of the

icon upon entering Panic Mode.

3-buttons remote

If you are threatened in or near your vehicle, you can attract attention by triggering the system

with your 3 buttons remote. Just press

or

buttons for five seconds, and you will enter

Panic Mode. The siren will sound and the parking lights will flash for the programmed siren

duration. To stop Panic Mode at any time, repeat the command but hold on the button for only

one second.

The panic mode can also be used to locate the vehicle.

11

© 2006 Astroflex Electronics - All rights reserved

Advertising