Metz MECABLITZ 52 AF-1 digital Nikon - Manual (Page 153)

153
k
Setting the mode of operation
• Switch on the flash unit with the ባ
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last
(e.g. M flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select the desired mode
of operation.
• Press on the selected mode of operation
that is highlighted in black. The setting is
adopted immediately.
• Set a suitable mode of operation on the
camera, e.g. P, S, A etc.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
7.2 i-TTL-BL flash mode ( )
This digital flash mode is only supported by
cameras if lenses are used that transmit
distance data to the camera (for example,
"D-AF Nikkor lens"). When shooting this data
is taken into consideration in addition in
adjusting the flash exposure.
Setting the mode of operation
• Switch on the flash unit with the ባ
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
• Set a suitable mode of operation on the
camera, e.g. P, S, A etc.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the touch
display.
The setting will take effect immediately.
TTL BL
TTL BL
TTL BL
52AF-1
NIK
TTL
M
TTL
TTL BL
M
TTL
INFO
EV
0,7 -7,9 m
Z
OOM 35 F4.0 m
m
M
INFO 1/1
7,9 m
Z
OOM 35 F4.0 m
m
M
INFO 1/1
7,9 m
Z OOM 35 F4.0 m
m