Metz MECABLITZ 58 AF-2 digital Canon User Manual
Page 141
141
ķ
19.1 Switching the remote flash mode on and off
• Press the
key repeatedly until "Select" appears
on the display.
• Use the
and
keys to select "Remote" from
the menu. The selected menu option will be indicated
by a dark bar.
• Press the
key to confirm the selection of
"Remote".
• Use the
and
keys to select "Remote
Master"
for master operation, "Remote Slave"
for slave operation, or "Remote OFF" to deactivate
remote flash mode.
The setting is effective immediately.
• Press
repeatedly to return the display to its nor-
mal reading. If the
key is not pressed, the display
will switch back to normal automatically after appro-
ximately 5 seconds.
ĭ
İ
Set
ĭ
İ
Sel
19.2 Settings on the master flash unit
Slave groups A and B are always activated. They cannot be deactivated.
The master flash unit M and slave group C can be activated or deactiva-
ted, however. If the master flash unit is deactivated, it only controls the
slave units and does not contribute to exposing the shot
The
key can be used to sequentially access the settings for the master flash
unit M and the slave flash units in groups A, B, and C.
Canon E-TTL remote
Adjusting the settings for slave group A
• Press the
key repeatedly until "A" (for slave group A) appears on the LC
display.
• While A is displayed, press the
key repeatedly until TTL (E-TTL remote)
appears in the display next to the A.
• While A TTL is displayed, the
and
keys can be used to adjust the
flash exposure correction value for the slave flash units in group A, from -3 f-
stops (EV) to +3 f-stops (EV) in 1/3 increments.
• Press
to save your settings. If the
key is not pressed, the settings will be
saved automatically after approximately 5 seconds.
Adjusting the settings for slave group B
• Press the
key repeatedly until B TTL (for slave group B) appears on the
LC display.
• While B TTL is displayed, the
and
keys can be used to adjust the
flash exposure correction value for the slave flash units in group B, from -3 f-
stops (EV) to +3 f-stops (EV) in 1/3 increments.
• Press
to save your settings. If the key
is not pressed, the settings will be
saved automatically after approximately 5 seconds.
+
–
Para
+
–
Mode
Para
Para
☞
Para
Sel
CH1
TTL
AZoom 28
TTL+
1
/
3
F32
B
A
M
Select
BEEP
FB
Remote
İ
ĭ
Set
☛
☛
Remote
Master
İ
ĭ
Set
☛
709 47 0210.A3 58 AF-2 Can 20.06.2011 16:30 Uhr Seite 141