Microsens Fast Ethernet Desktop Switches - Manual

MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. 0 23 81/94 52-0 - FAX -100 - www.microsens.com
General
The MICROSENS mini switch offers the connection of four end devices via twisted pair
cable. An additional fiber uplink port (100Base-FX) is for the connection to the central
distribution.
The mini switch has a very compact design. Especially in the end device area the use of
this mini switch is very cost effective, this makes him very useful for small workgroups.
The RJ-45 ports are selecting the speed of the connected device (10/100
autonegotiation) automatically. Due to its auto crossing function the switch recognizes
the pin out of the TX port, which allows to use always standard patch cables.
The fiber optic uplink port for the connection to the central distribution is working
with 100 Mbps and can be used in half or full duplex mode, depending on the
requirements. Using single mode fiber it is possible to cover distances up to 100 km.
This desktop version can be mounted onto walls with the optional available wall mount
bracket. Further models are designed for the installation into cable trunks and sub
floor systems.
Fig.: Mini 5 Port Switch, front and – back view
MICROSENS
Fast Ethernet
5 Port Mini Switch