Connections, Ncast presentation recorder reference manual – NCast PR720 User Manual
Page 12
NCast Presentation Recorder Reference Manual
1.7. C
ONNECTIONS
The following diagram describes the back-panel connectors available:
•
Serial Control – Wired control from a touch panel, such as Crestron or AMX
•
Ethernet – Connection to the Internet
•
XLR Audio – Balanced XLR input connector and additionally a balanced 0.25” connector
•
VGA or Component – Input from the presenter's PC or a component hi-def camera
•
VGA Loopback – VGA output, usually to the room projector
•
Component Out – Y-Pb-Pr output to the local display, VGA → Y-Pb-Pr breakout cable required
•
USB – For specifying a static IP connection with a USB drive
•
Line-In, Line-Out, Mic-In - Unbalanced 3.5 mm. audio connections
•
HDMI – Video input from cameras, audio not supported
•
DVI-I – Digital or Analog DVI input
•
Y/C – S-Video NTSC or PAL input
•
Composite – NTSC or PAL input
NCast Corporation
Revision 1.1
Page 12