Nevion N-BOX - Manual (Page 5)

N-BOX Rev. E
nevion.com | 5
2 Specifications
2.1 General specifications
AC Power: External power supplies 100 - 260 VAC
DC Power: ±15V, connector DB9 male
Dimensions: 109 x 43 x 198 mm.
Card slots: 1.
Internal voltages: +5V, -5V, +15V, -15V.
2.2 Power constraints
There is a power constraint of 4W on N-BOXs delivered before 2008-09-01. This constraint
has been removed for N-BOXs delivered after this date. This constraint causes some newer
cards such as DWC-HD, ARC-SD, UDC-HD-XMUX and other power demanding cards to not
function properly.
The two types of N-BOXs can be distinguished when looking at the power module on the
back without having connected any Flashlink backplane into the N-BOX. N-BOXs produced
before 2008-09-01 have the number 4052966 printed in the silk screen next to the 16 pin
Flashlink connector. A newer N-BOX has no such marking.
2.3 Front view
The front view of the N-BOX shows status LEDs for the module that is included in the N-
BOX.
Figure1: LEDs in from of the N-BOX
The leftmost 1 LED of each module card is a "general status" LED.

Green light means that the card is OK.

Red light means that the card is faulty.

No light means that the power is not switched on.
The meaning of each LED on the module cards is described in their respective manuals.
1 LEDs from left to right when box is viewed as in this figure.