Nevion 3GHD-EO-D15xx - Manual (Page 5)

3GHD-EO-D15xx Rev. 2
nevion.com | 5
2 Specifications
2.1 General
Power +5V DC / 3W, +15V DC/1.5W
Control Control system for access to setup and
module status with BITE (Built-In Test Equip.)
2.2 General functions
Card labeling
Firmware upgrades
Card location in frame through blinking LED
The following parameters can be set and monitored via the web and SNMP interface:
Function Options
Laser On or off
Electrical input Normal or bypass
Reclocker 1 Enable or bypass
Reclocker 2 Enable or bypass
The following parameters can be alarmed via the web and SNMP interface:
Voltage +5V, +3.3V, +5V, +15V and +58V.
Reclocker Loss of lock
2.3 Optical Output
Transmission circuit fiber Single mode 9/125um
Light source DWDM DFB Laser
Optical power +5dBm
Optical centre wavelength According to ITU-T G.694.1 for DWDM
Max number of channels per fiber 40 within the C-band for DWDM.
Channel spacing 100GHz
Max. wavelength drift ± 0.16nm DWDM
Temperature range 0 to +40 °C
Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps,
0.2 UI max. @ 1485Mbps
0.2UI typ. @ 2970Mbps
Connector return loss >40dB w/SM fiber
Maximum reflected power 4%
Connector SC/UPC