3 configuration, 1 format configuration – Nevion 3GHD-EO-D15xx User Manual
Page 7
3GHD-EO-D15xx
Rev. 2
nevion.com | 7
3 Configuration
3.1 Format configuration
The 3GHD-EO-D15xx can support a number of different formats. The correct configuration
can either be set with a DIP switch or with the GYDA System Controller. The layout of
3GHD-EO-D15xx is shown in the drawing below with the DIP switch to the upper left
position.
Figure 2: 3GHD-EO-D15xx.xx board layout
DIP switch configuration must be set according to the table below:
Switch # Label Function, DIP = ON Function, DIP = OFF
Comment
1
RCL1 Reclocker ON
Reclocker Bypass
Reclocker mode
2
EQ Cable equalizer ON Cable equalizer Bypass Equalizer mode
3
RCL2
Not used
4
R1
5
R2
6
E/O
7
D/B
8
E/O
9
DOP
10
OVR Override GYDA
control
Config. with DIP
switch
GYDA control
Config. with GYDA
Select configuration
from GYDA
All DIP switches are off when pointing towards the release handle.