Nevion 10G-TR-C1xxx - Manual (Page 6)

10G-TR-C1xxx Rev. B
nevion.com | 6
3
Configuration
The correct configuration can either be set with a DIP switch or with the GYDA Control
System. The layout of 10G-TR-C1XXX is shown in the drawing below with the DIP
switch to the upper left position.
Switch # Label Function, DIP = ON Function, DIP = OFF Comment
1 1 Laser enable Laser disable
2 2 n/a
3 3 n/a
4 4 n/a
5 5 n/a
6 6 n/a
7 7 n/a
8 OVR Override GYDA
control.
Configuration with
DIP switch GYDA control.
Configuration with
GYDA Select configuration
from GYDA
All DIP switches are off when pointing towards the release handle.
Figure 3: Multicon GYDA System Controller settings (optional)