Datalogic Scanning Universal Keyboard Wedge Connectivity - Manual (Page 3)

1.0 SCOPE :
This guide is intended for use with DATALOGIC products supporting the Universal Wedge interface. The information in this guide includes :
PC or Terminal Model : (PC or Terminal model and Manufacturer).
Keyboard Type ID: (This number entered into the wedge configuration for the proper PC / Terminal emulation by country),
DATALOGIC terminal cable part number : (DATALOGIC part number for ordering, call your DATALOGIC Sale Representative for availability of cables)
Single Cable Option :
(Designates if a single cable connection is available, see table 1b),
Product minimum wedge software version : (The minimum WEDGE firmware version required to support the listed PCs and Terminals by product. No firmware listing designates no support)
2.0 CABLING :
Cables for connecting your DATALOGIC scanner to the listed PC / Terminal can be accomplished in one of two ways:
Scanner base cable and terminal cable. ( base cable will connect to the various terminal cables listed on pages 2-10 .) DATALOGIC single cable option.
Minicomputer
Keyboard
Terminal Cable Scanner Base Cable
Scanner
Minicomputer
Keyboard
Datalogic Single Cable
Scanner
Product(s) Scanner Base Cable for use with cables listed on pages 4-15.
Part Number Description
DATALOGIC single cable options (except where noted)
Part Number Desciption
VS1000 w/ STI Interface
VS1200 w/ STI Interface
HS1250 w/ STI Interface
SP400RF w/ STI Interface
8-0203-01 12' base cable, 25 pin "D" connector.
None
SP400 WorldWideWedge 8-0177-01 12' base cable, 25 pin "D" connector base cable, Power off external AC adapter option.
8-0119-01 8', 9 pin "D" connector, Socket, Power off the terminal, Indirect-connect for IBM (or compatible) computer
type PC/AT through "Y" cable 8-0120-01 or 8-0120-02. (This option is a two cable solution.)
QS6000+ Universal Wedge 8-0424-15 15' base cablew/ext. AC power option. 8-0424-08 IBM PC AT/DATALOGIC, POT, KBW, 11’
DUET Universal Wedge
VS800 Universal Wedge 8-0466-11 12' base cable, 25 pin "D" connector, Socket, Power off external AC power adapter ONLY. 8-0466-04 8', 5 pin "Din" connector, Plug (Computer end), 6 pin "Mini Din" connector, Socket (Keyboard end), Power
off external brick, Direct-connect for Universal PC application using Adapter cable # 2103-0035 (5 pin to
6 Mini pin). (For XT/AT applications only)
PowerScan UW
QS1000 UW 8-0424-16 12' base cable, 25 pin ‘D’ connector, socket w/ power off external AC power adapter option. 8-0424-08 IBM PC AT/PS2, POT, KBW, 11’. (For XT/AT applications only)
Table 1a. Table 1b.
Page 3
F (1) = France Type I, F (2) = France Type II ,USA = Untited States ,D = Germany ,B = Belgium ,UK = England ,ALT = ALT mode ,I = Italy ,CH = Swiss ,S = Sweden ,E = Spain ,H = Hungary. * : Requires +5 volt or standard product power supply.
INTL = France International , J = Japan , DK = Denmark , PO = Portugal ,IL = Israel , PL = Poland , NO = Norway ,