Nevion DA-AES - Manual (Page 5)

DA-AES Rev. J
nevion.com | 5
2
Specifications
Electrical Input:
Number of inputs: 1 or 2
Standard: AES-3
Supported Sample Rate: 15-96 kHz
Signal Amplitude: 0.2-7Vp-p
Connector: DB15 balanced
Impedance: 110 ohms nominal
Electrical Output:
Number of outputs: 8 or 4+4
Connector: DB25 balanced
Signal amplitude: 4Vp-p ±1Vp-p
Impedance: 110 ohms nominal
Features:
Configurable dual 1 input to 4 outputs or single 1 input to 8 outputs
Electrical:
Power: +5V DC / 0.5 W
Control: Control system for access to setup and module status
with BITE (Built-In Test Equipment) for use with GYDA
Control System.