Nevion Multicon SNMP - Manual (Page 10)

Multicon SNMP Data Model Rev. 0
nevion.com | 10
4 Data model overview
The figure on the next page gives a total overview of the entire SNMP data model for
Multicon.
For reference to the description and possible values for each parameter please refer to the
description within the MIB file itself.
Example:
moduleStatus OBJECT-TYPE
SYNTAX INTEGER { ok(1), fail(2), removed(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is the module present and operating?"
::= { moduleEntry 3 }
This shows that it is a read-only parameter with the possible values ok, fail and removed. A
relevant description is also shown above.
Note that it is highly recommended to use a MIB browser to read the MIB file as it can be
very hard to read the MIB as a text file.