NewHank Workmate - Manual (Page 2)

INTRODUCTION
Congratulations and thank you for purchasing the NewHank Workmate mixer.
This mixer is a representation
of NewHank’s continuing commitment to produce the best and highest quality
audio products possible at an affordable price-point.
Please carefully read and understand the instructions in this manual thoroughly before attempting to
operate this unit.
These instructions contain important safety information regarding the use and maintenance of this unit.
Take special care to follow all warning symbols and labels both on the unit and printed in this manual.
Please keep this manual with the unit, for future reference.
Do not discard the packing carton in the trash. Please recycle whenever possible.
KEY FEATURES
• 2U Compact Rack mount design • Stereo Master Balance Control
• USB/SD Audio Player (32GB Max) • Player reads both WAV and MP3 file formats
• Bluetooth audio connectivity to Media Player • All, Random and Single Play function
• Assignable crossfader section • 2 band EQ on line input channels
• Master output both on balanced XLR and RCA • Stereo Master Balance Control
• Microphone Gain , Treble and Bass Control • Adjustable individual ZONE Output
• Extremely clean signal to noise ratio
GETTING STARTED THE BASIC PRINCIPLES
1. Study the diagrams on page 4 and 5.
3. Make sure all devices are turned off and all faders, zone and gain rotary’s are set to "zero”.
4. Connect all your stereo input sources as indicated in Figure 2
on page 5.
5. Connect the stereo outputs to power amplifier(s), powered speakers and so on.
6. Plug all devices into AC power.
7. Always switch your system on in the following sequence:
1. Audio input sources (like DVD- CD Players, Tuners etc).
2. Mixer.
3. Amplifiers, Powered speakers etc.
Always switch your system off in reverse sequence:
1. Amplifiers, Powered speakers etc.
2. Mixer.
3. Audio input sources (like DVD- CD Players, Tuners etc).
page 2
NEWHANK www.newhank.com Workmate Instruction Manual