NewHank Playmate User Manual
Page 5
12.
AUX 4 INPUT JACK -- This Stereo 3.5MM input. Volume will be controlled by the channel four fader.
The channel INPUT SELECTOR SWITCH (2) must be in the "Aux 4" position.
13.
HEADPHONES -- Connect your headphones ( 6. 3 and 3.5mm) to this output for cueing
and mixing.
14.
CUE GAIN -- Adjusts the audio level of the headphones.
15.
CUE BLEND -- Slide this to mix the Cue channel and Program mix in the headphones. When all the
way to the left, only channels routed to the Cue channel will be heard. When all the way right, only the
Program mix will be heard.
16.
OUTPUT CONTROLS: PFL ZONE -- Adjusts the PFL ZONE output volume on RCA.
ZONE -- Is a second and adjustable stereo Master output.
MASTER -- Adjusts the main master output volume.
17. CROSSFADER ASSIGN -- Enables you to route 1 of 4 channels via the cross fader.
Now you can use 1 fader to simply mix 2 channels.
18.
CHANNEL FADER -- Adjusts the audio level on the corresponding channel.
19.
CROSSFADER -- Blends audio between the channels assigned to the left and right side of
the cross fader. This part is user replaceable.
20.
MIC ON/OFF -- Turns the dedicated microphone input on or off.
21.
MIC GAIN -- Adjusts the audio level of the microphone signal.
22. MIC BASS -- Adjusts the low (bass) frequencies of the microphone channel.
23.
MIC TREBLE -- Adjusts the high (treble) frequencies of the microphone channel.
page 5
NEWHANK
Playmate Instruction Manual